Network Configuration
- Use a web browser on PC #1 to access the simulator using the
address previously set with the MOB-IP-SIM Manager. The example below
uses 130.29.181.201 but this will vary depending upon your network.
- Select the Configuration link and then the Network
link to access the Network
settings.
- Review the settings. No modification should be needed.
- Gateway and DNS server addresses are needed only if the test
system is connected to an in-house LAN and the user plans to
access the external internet. You can usually determine the DNS
addresses on the network by entering the following Windows DOS
prompt command: ipconfig /all | more on a PC
connected to the user's network.
- Save changes
