This test verifies that when the mobile station initiates a dynamic Mobile IP call, the Mobile IP RRQ is denied due to insufficient HA resources. The HA will not have resources either because the HA address pool is not configured or all IP addresses in the address pool have been exhausted. The Home Agent address must be set to 0.0.0.0. This may be accomplished by sending the wireless device an AT$QCMIPHA=0.0.0.0,1 command. The user's device may require a different method. Note that a call is never set up in this test. It is up to the user to clear any remmants of the call before proceeding.