This chapter will tell you:
-
How to confirm you that have all the components of the MOB-IP-SIM™
-
What additional components you are required to supply
-
How to connect the MOB-IP-SIM™ to your RF test set
-
How to install the MOB-IP-SIM™ Manager configuration utility
Carefully unpack your MOB-IP-SIM™ and inspect for any damage. You should have one each of the following:
-
Main MOB-IP-SIM™ processor unit (Either MIP-5800 or MIP-5850 )
-
DE-9 to DE-9 null modem serial cable
-
Cat-5 10BaseT cable for connecting the MOB-IP-SIM™ to the LAN
-
External 12VDC power supply
-
MOB-IP-SIM™ CD-ROM
-
This manual
You are expected to provide the following items:
-
Agilent E5515C™ RF Test Set with the E6702B cdma2000 lab application option
-
A Windows PC with free serial and Ethernet ports
There is no need to open the MOB-IP-SIM™ enclosure since all configuration is done using software interfaces. The unit's operating system, user-specific configuration data, and any user-installed content are stored on an internal CompactFlash™ memory card for maximum reliability.
Since the MOB-IP-SIM™ is a feature extension product designed to be used with the Agilent E5515C, installation and operation will require reference to the Agilent documentation for those procedures outside the scope of this document.
After reviewing the connection diagram in Appendix D, E5515C Interconnection , install the MOB-IP-SIM™ Manager setup utility found on the accompanying CD-ROM by running setup.exe located in the MobIpSimManager folder.
Open the MOB-IP-SIM™ Manager from your PC by using the Windows Start menu. When the Options screen appears, click on the button and follow the instructions to configure the LAN parameters. The manager will instruct you to power-on the unit, connect cables, etc. at the appropriate time. When the setup is complete, the MOB-IP-SIM™ will have been assigned a specific IP address. Record the MOB-IP-SIM™ IP address in section [B] of Appendix E, Simulator Configuration Worksheet .
The IP address may be set without the MOB-IP-SIM™ Manager by following the procedure in Appendix F, Manual MOB-IP-SIM Configuration .
![[Note]](images/note.png)
|
Note |
|---|---|
|
Do not connect anything until so instructed by the MOB-IP-SIM™ Manager software |
|