If you plan to use a mobile phone's built-in browser, you will need to set the browser's home page to something that can be accessed when the browser is launched. The suggested home page setting is http://<mobipsimaddress>/mobipdemo.htm where <mobipsimaddress> is the MOB-IP-SIM™ address recorded in section [B] of Appendix E, Simulator Configuration Worksheet . This will allow you to access the built-in web server. Any valid local or public web server is also acceptable as the home page, so long as it is designed for small mobile screen displays.
If you plan to use the mobile as a wireless modem from a PC, follow the phone manufacturers instructions for configuring this connection.
Check to make sure you have completed the following steps before attempting a Mobile IP Call:
The MOB-IP-SIM™ was set up on the network and its IP address was recorded on the worksheet.
The mobile station provisioning parameters related to Mobile IP were recorded on the Configuration Worksheet.
The MOB-IP-SIM™ was configured using the data from the Configuration Worksheet.
The E5515C was successfully configured to use the External PDSN mode to establish a LAN connection to the MOB-IP-SIM™ .
The test phone was configured to use either its built-in browser with a valid home page or to act as a wireless modem for a PC-based web browser.